Connecting Your X3 Device To Wifi - Divvy Digital

Using the provided remote, Click the HOME Button on the remote.

(If you cannot find your remote, you can also use a mouse. To do this, plug a USB mouse into the X3 device. You can use a Bluetooth mouse as well as long as it comes with the USB Bluetooth adaptor.)

Click the PLAY/PAUSE Button on the remote. It should initially say [Monitor Enabled] in the top left — We want to make sure it now says [‘Monitor Disabled’].

You’ll know that monitoring is disabled if this button turns red.

Click the home button once again to go to the desktop.

Once on the desktop, open the first application at the bottom of the Home Screen to open SETTINGS.

Click on ‘Network & Internet’.

On the WiFi settings screen you will see a list of all available WiFi networks.* Scroll through this list until you get to your WiFi network. Open the WiFi Network settings by clicking on the name of your WiFi network.

*If your network is set to hidden you can click the “+” button. Here you will be prompted enter your network name.

After you’ve click your WiFi network name you will be prompted to enter you WiFi credentials. It’s often useful to select the “Show Password” option before entering in your details. 

Enter your WiFi network password.

Then click on the GREEN ARROW on the right-hand side of the keyboard screen.

Make sure your Network Name says CONNECTED beneath it.

At this point you should be connected to WiFi. Congratulations!

Click the HOME Button on the remote.

Open the fourth application on the bottom of the Home Screen.

Click the PLAY/PAUSE Button on the remote. We want to make sure it now says [‘Monitor Enabled’].

Updated content should load on its own from here.