Connecting Your Device To Wifi - Divvy Digital

On most remotes this means pressing the green android button. If this does not work or you cannot find the Android button, try pressing any other button. Usually, this will wake up your remote control.

You can go to the desktop by pressing the home button. The home button is normally identified by an icon of a house or a circle.

While on the desktop screen, click the android launcher icon.

Once the Android Launcher opens, you will see a black screen with a lot of text on it. On top portion of this screen there are a few options (Client Enable, Monitoring Enabled, Google Disabled… etc.)

Here we want to disable monitoring by clicking on the Monitoring Enabled button in green. 

You’ll know that monitoring is disabled if this button turns red.

After disabling monitoring, you’ll need to disable the client. That button is located to the left of Monitoring button in the same row. 

Click the “Client Enabled” button in green to turn it off. 

You will know the client is disabled when the button reeds “Client Disabled” and the button turns red.

In the same row of buttons, to the right of “Google Disabled” you will see an option for WiFi Settings. Click this button to ender the WiFi settings screen.

In the sidebar on the left, the first option you will see will toggle the Wi-Fi either on or off. If the Wi-Fi is in the OFF position, click this option to turn WiFi ON.

On the right side, you’ll see a list of all available WiFi networks.* Scroll through this list until you get to your WiFi network. Open you WiFi Network settings by click on the name of your WiFi network.

*If your network is set to hidden you can click the “+” button in the top right corner. He you will be prompted enter your network name.

After you’ve click your WiFi network name you will be prompted to enter you WiFi credentials. It’s often useful to select the “Show Password” option before entering in your details. 

Enter your WiFi network password.

Once entered you can press “Connect” in the bottom right corner of the pop-up window.

This will close the pop-up and bring you back to the main WiFi settings page. In the list of WiFi networks on the right, verify that your network has the words “Connected” underneath it. If there are any other works, you device will not be connected to the WiFi Network.

At this point you should be connected to WiFi. Congratulations!

Navigate to the desktop screen by clicking the home button on your remote control. Once there you can reload the Android Launcher by click on the icon. 

The last step is to reenable the client and monitoring by clicking on their buttons in the top row. These should both turn green after being clicked. This will connect your device to our network and start the launching process. Once enabled you only have to wait a few seconds and the generate application will load.